- 中文
- English
TEL
+86 13929505091
Elaborate
Repeated clamping accuracy ≤0.001mm, 4 times diameter runout ≤0.001mm
Case: Reaming size accuracy up to 0.002mm
Faster
Quick knife change in 15 seconds
Knife length positioning function
Significantly reduce switching time
Case: Monthly productivity can be increased by more than 30%
economize
High damping characteristic
Greatly improve tool life
Greatly reduce tool wear
Case: The cost of the tool can be reduced by more than 30%, and the service life of the dental punch tool is greatly increased from 2000PCS to 8000PCS
TOOL HANDLE PRODUCT COMPARISON
数秒换刀
数秒内换刀，15秒切换
夹持精度
刀具重复装夹精度可保证在0.001mm，4倍径前端跳动保证0.002mm
出色的减振性能
防止微小爆裂、获得最佳工件表面、以及大幅延长刀具使用寿命
精确的轴向长度预调整
长度调节的精度在0.01mm 范围内，调节行程为10mm，减小95%以上的辅助时间
Side lock seat
Collet seat
Hydraulic seat
TECHNICAL PARAMETERS & INDICATORS
Back fastening type
● It can be tightened with a wrench from the opposite direction of the cutting tool and is best used on the front side.
● Coolant distribution pipe Rc(PT)1/8 screw connection for drill with oil holes.
● Slim design to avoid interference with adjacent tools.
Note:
1. When the coolant is used in the model with ★ symbol, a little coolant will flow out from the inner diameter slit.
2. Do not use axial adjusting screws
DOWNLOAD
FileName
FileSize
